User contributions
Jump to navigation
Jump to search
- 18:02, 13 February 2022 diff hist +99 N File:Figure 2- Schematic of a double mirror system approach for testing of bifacial cells or modules.png Schematic of a double mirror system approach for testing of bifacial cells or modules current
- 17:59, 13 February 2022 diff hist +76 N File:Figure 1- Schematic description of the equivalent irradiance (GE) method.png Schematic description of the equivalent irradiance (GE) method current
- 17:58, 13 February 2022 diff hist +175 N File:Figure 3- Unit for contacting the front of silicon solar cells. Current and voltage contact pins are electrically isolated from each other to enable four-wire measurements.png Unit for contacting the front of silicon solar cells. Current and voltage contact pins are electrically isolated from each other to enable four-wire measurements current
- 17:57, 13 February 2022 diff hist +137 N File:Figure 2- Schematic of a solar simulator with a Xenon arc lamp for measuring the IV characteristics of solar cells under illumination.png Schematic of a solar simulator with a Xenon arc lamp for measuring the IV characteristics of solar cells under illumination current
- 17:56, 13 February 2022 diff hist +574 N File:Figure 1- Picture of one of the outdoor measurement facilities of the European Solar Test Installation (ESTI) located at the Joint Research Centre (JRC) in Ispra, Italy.png Picture of one of the outdoor measurement facilities of the European Solar Test Installation (ESTI) located at the Joint Research Centre (JRC) in Ispra, Italy. A reference solar cell is installed over the module to record the incoming irradiance. The temp current
- 17:50, 13 February 2022 diff hist +503 N File:Figure 7- Heat maps illustrating the distribution of total energy for the different module operating conditions for 1000 virtual modules simulated in the six reference climates of IEC 61853-4.png current
- 17:49, 13 February 2022 diff hist +75 N File:Figure 6- Simplified schematic of the steps used within IEC 61853-3 to calculate CSER.png current
- 17:48, 13 February 2022 diff hist +75 N File:Figure 5- Positions for measuring the temperature of the test module behind the cells.png current
- 17:48, 13 February 2022 diff hist +226 N File:Figure 4- Photograph of the angular response measurement setup and schematic image of Pasan 3B simulator at CREST.png current
- 17:47, 13 February 2022 diff hist +74 N File:Figure 3- Picture of the Laser–Differential Spectral Response facility at PTB.png current
- 17:46, 13 February 2022 diff hist +110 N File:Figure 2- Graphical summary example of the inputs and outputs IEC 61853 standards series for energy rating of PV modules.png current
- 17:46, 13 February 2022 diff hist +182 N File:Figure 1- The performance of a module depends on the specific climatic conditions of the PV system site. On the left, a PV system at a tropical site, on the right, a PV system at a desert site.png current
- 17:42, 13 February 2022 diff hist +101 N File:Figure 4- Performance parameters of PV module as a function of temperature; a- Maximum Power versus temperature.png current
- 17:41, 13 February 2022 diff hist +153 N File:Figure 3- Performance parameters of PV module as a function of temperature; a- Short Circuit Current versus temperature, b- Open circuit voltage versus temperature.png current
- 17:41, 13 February 2022 diff hist +164 N File:Figure 2.2- Performance parameters of PV module as a function of temperature; a- Short-circuit current versus open-circuit voltage, b- maximum power versus open-circuit voltage.png current
- 17:40, 13 February 2022 diff hist +164 N File:Figure 2.1- Performance parameters of PV module as a function of temperature; a- Short-circuit current versus open-circuit voltage, b- maximum power versus open-circuit voltage.png current
- 17:39, 13 February 2022 diff hist +66 N File:Figure 1- (a)- Solar Simulator, (b)- Thermal Chamber, (c)- Attenuation masks.png current
- 17:34, 13 February 2022 diff hist +137 N File:Figure 5- Experimental results of angular response measurements, on the left for various PV cells and on the right for two different PV modules.png current
- 17:33, 13 February 2022 diff hist +169 N File:Figure 4- Schematic of setup configuration for angular response measurement of a tilted PV module with 3 bypass diodes (left) and the resulting measured I-V characteristic (right) .png current
- 17:32, 13 February 2022 diff hist +87 N File:Figure 3- Schematic of the experimental layout for angular response measurements of small samples.png current
- 17:32, 13 February 2022 diff hist +79 N File:Figure 2- Ideal measurement setup for the angular response characterisation of PV modules.png current
- 17:31, 13 February 2022 diff hist +170 N File:Figure 1- Schematic of optimal orientation angle of a PV module operating outdoors and seasonal sun path geometry with respect to a point on earth at a latitude of about 50° N.png current
- 17:24, 13 February 2022 diff hist +77 N File:Table 2- Methodologies for classification of solar simulators according to IEC 60904-9.png current
- 17:24, 13 February 2022 diff hist +184 N File:Figure 3- Example of correction for spatial non-uniformity.png current
- 17:23, 13 February 2022 diff hist +88 N File:Figure 2- Typical designs of solar simulators used for output power characterization of PV modules.png current
- 17:20, 13 February 2022 diff hist +95 N File:Figure 1.png current
- 17:20, 13 February 2022 diff hist +95 N File:Main components of solar simulators used for PV module output power characterization.png current