Difference between revisions of "Primary calibration methods"
Jump to navigation
Jump to search
(Paragraph "Case study" moved to Reference devices) |
|||
Line 14: | Line 14: | ||
All 4 methods can be conducted as primary or as secondary calibration methods, dependent on the reference applied. A description of these 4 methods can be found in IEC standard 60904-4 [4]. Follow the links above to get briefly summarized descriptions. | All 4 methods can be conducted as primary or as secondary calibration methods, dependent on the reference applied. A description of these 4 methods can be found in IEC standard 60904-4 [4]. Follow the links above to get briefly summarized descriptions. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
== References == | == References == |
Latest revision as of 16:01, 9 May 2022
Ingo Kroeger
Calibration procedures of a reference cell
In principal there are 4 different procedures to calibrate reference solar cells:
a) The direct sunlight method
b) The global sunlight method
c) The Differential spectral responsivity method
d) The solar simulator method
All 4 methods can be conducted as primary or as secondary calibration methods, dependent on the reference applied. A description of these 4 methods can be found in IEC standard 60904-4 [4]. Follow the links above to get briefly summarized descriptions.
References
[4] IEC 60904-4:2009, Photovoltaic devices - Part 4: Reference solar devices - Procedures for establishing calibration traceability